FORGOT YOUR DETAILS?

MPK 70 Casting Resin

Ideal for casting plastic sculptures, models, prototypes. masters, figurines, picture frames, toys, industrial parts, decorative ornaments, moldings, furniture, and fine detailed reproductions.

MPK70 – 180 second Casting Resin

A 65-70D hardness, Very Strong with a little flex (not brittle) 50/50 mix, odorless, paintable, 180 sec Gel Time, No leeching, fast de mold time, excellent detail, VERY VERY easy to sand & trim. Will take a pigment.

MPK70 Specs

MPK70 – 5 Minute Casting Resin

Has 5-6 minute GEL TIME casting resin. Light tan in color. Odorless, 50 /50 mix. Paintable. After de molding easy trimming, clean up and sanding. Ideal for those small model parts that need to be cured in a pressure pot for air free parts. Excellent detail.

MPK70 – 10 Minute Casting Resin

Has 10 minute GEL TIME casting resin. Light tan in color. Odorless, 50 /50 mix by weight. Paintable. After de molding easy trimming, clean up and sanding . Ideal for those small model parts that need to be cured in a pressure pot for air free parts. Excellent detail.

MPK 80 – Brushable Resin – 3 Minute

A simple-to-use brushable resin that can be brushed into silicone molds to create light weight hollow-backed pieces, or brushed onto the outside of a brushed-on silicone mold as a strong supportive shell. Can be used with fiberglass cloth for extra strength.

MPK80 – 3 minute Brushable Resin

ProductPrice

4 lb Kit MPK 80-3min Brushable Resin

A simple-to-use brushable resin that can be brushed into silicone molds to create lightweight hollow-backed pieces, or brushed onto the outside of a brushed-on silicone mold as a strong supportive shell. Can be used with fiberglass cloth for extra strength.

$39.99

8 lb Kit MPK 80-3min Brushable Resin

$72.99

9 lb Kit MPK 80-3min Brushable Resin

A simple-to-use brushable resin that can be brushed into silicone molds to create lightweight hollow-backed pieces, or brushed onto the outside of a brushed-on silicone mold as a strong supportive shell. Can be used with fiberglass cloth for extra strength.

$74.99

16 lb Kit MPK 80-3min Brushable Resin

$139.99

Brushable Resin Instructions – PDF

MPK 90 High Impact 3 Min Casting Resin

The MPK-90-3min Hi Impact casting resin is a very strong semi flexible casting resin. Ideal with applications that require more strength than regular casting resins. With this product you do have the capabilities to do brush ups layer upon layer. The MPK-90-3min is paintable, no leeching, odorless and tintable

MPK90 3 Min Hi Impact Black Casting Resin

The MPK-90-180min Hi Impact Black casting resin is a very strong semi flexible casting resin. Ideal with applications that require more strength than regular casting resins. With this product you do have the capabilities to do brush ups layer upon layer. The MPK-90-3min is paintable, no leeching, and odorless.

Tooling Resin

MPK18-80 Tooling Resin Kit

MPK-18-80 is a very hard, filled, LOW SHRINK tooling resin. 80D hardness. 50/50 mix. Light gray in color. Hi-heat resistant. 8-10 minute work time.

Pigments

PIGMENTS are only available for purchase with an order of CASTING RESIN
Our pigments are highly concentrated and typically require very little pigment to achieve the desired color. Note : this is not an exact science and your mixed color may vary from batch to batch.
They are packaged in a wide mouth screw cap container for ease of use. The manufacturer of our casting resins suggests that the pigment be added to the B side of the resin.
PLEASE READ: When using these pigments ALWAYS put paper down. YOU MUST WEAR GLOVES, do not get on skin , do not spill on any surface. VERY, VERY, VERY difficult to clean off skin and almost impossible to clean off most surfaces.

Silicone/Resin Starter Kit

This “Starter Kit” contains the high quality silicone and resin needed to produce small projects. Just the right amounts to familiarize yourself with our products.

TOP