FORGOT YOUR DETAILS?

Professional Grade Mold Making RTV Silicone Rubber – the 100 Series

Regular Pot Life - Purple Catalyst
Soft 107 Medium 122 Firm 128 Extra Firm 135
Regular Pot Life 45 minutes 45 minutes 45 minutes 45 minutes
Mix Ratio 10:1 10:1 10:1 10:1
Durometer 5 – 9  A 21 – 25 A 26 – 30 A 32 – 36 A
Tack Free Time 6-8 hours 6-8 hours 6-8 hours 6-8 hours
De Mold Time 12-24 hours 12-24 hours 12-24 hours 24-48 hours

Soft 107

Regular Pot Life – Purple Catalyst

This Silicone is used to make large intricate patterns, skin molds or where extreme flexibility and elasticity are required.
Ideal for Candle & Soap Mold making, Pad Printing. Extreme flexibility and elasticity (5-9duro )

Medium 122

Regular Pot Life – Purple Catalyst

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.
An easy to pour 21-25 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Firm 128

Regular Pot Life – Purple Catalyst

Excellent choice for intricate patterns, skin molding and applications where higher durometer, dimensional stability and an extremely tough rubber are required.
An easy to pour 26-30 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Extra Firm 135

Regular Pot Life – Purple Catalyst

For mold making of intricate patterns, skin molding and applications where higher durometer, dimensional stability and an extremely tough rubber are required.
An easy to pour 33-36 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Longer Pot Life - Blue Catalyst
Soft 107 Medium 122 Firm 128
Longer Pot Life 45 – 90 min. 45 – 90 min. 45 – 90 min.
Mix Ratio 10:1 10:1 10:1
Durometer 5 – 9  A 21 – 25 A 26 – 30 A
Tack Free Time 6-8 hours 6-8 hours 6-8 hours
De Mold Time 12-24 hours 12-24 hours 12-24 hours

Soft 107

Longer Pot Life

This Silicone is used to make large intricate patterns, skin molds or where extreme flexibility and elasticity are required. Ideal for Candle & Soap Mold making, Pad Printing.
Extreme flexibility and elasticity (5-9duro )

Compare Silicone Specs

Medium 122

Longer Pot Life

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.
An easy to pour low viscosity 21-25 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders. Ideal for the molding of picture frames, fireplaces and parts with severe undercuts

Compare Silicone Specs

Firm 128

Longer Pot Life

A durometer mold making silicone with longer pot life catalyst. This material is an excellent choice for mold making of intricate patterns, skin molding and applications where higher durometer, dimensional stability and an extremely tough rubber are required.
An easy to pour 26-30 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders.

Compare Silicone Specs

Fast Curing - Red Catalyst
Soft 107 Medium 122 Firm 128
Fast Curing 15 – 20 min 15 – 20 min 15 – 20 min
Mix Ratio 10:1 10:1 10:1
Durometer 5 – 9  A 21 – 25 A 26 – 30 A
Tack Free Time 45 – 60 min 45 – 60 min 45 – 60 min
De Mold Time 2 – 8 hr  2 – 8 hr  2 – 8 hr 

Soft 107

Fast Curing

This Silicone is used to make large intricate patterns, skin molds or where extreme flexibility and elasticity are required.
Ideal for Candle & Soap Mold making, Pad Printing. Extreme flexibility and elasticity (5-9duro )

Compare Silicone Specs

Medium 122

Fast Curing

A very good rubber for use in molding intricate patterns involving deep undercuts and where dimensional stability becomes important while maintaining a fairly low modulus.
An easy to pour low viscosity 21-25 duro silicone. Good mold life, for use when casting resins, polyester & epoxies. Popular with model makers & kit builders. Ideal for the molding of picture frames, fireplaces and parts with severe undercuts.

Compare Silicone Specs

Firm 128

Fast Curing

This material is an excellent choice for mold making of intricate patterns, skin molding and applications where higher durometer, dimensional stability and an extremely tough rubber are required.
IDEAL for model makers, hobbyists and do it yourselfers who use casting resins, epoxies, polyesters and polyurethanes.

Compare Silicone Specs

Black Catalyst

Our BLACK CATALYST can only be used with Soft 107, Medium 122 and Firm 128 Silicone bases. It is ideal for making rubber parts for your models (tires, straps, bumpers, bladders, etc) the ratio is a little different eg. 100 gr Base. How much catalyst you use will determine how dark your part will be. We suggest ratios of bewtween 15% & 30% by weight. (some shrinkage is expected)

ProductPrice

2 oz Black Catalyst

must be purchased in conjunction with product

$8.99

4 oz Black Catalyst

must be purchased in conjunction with product

$14.99

8 oz Black Catalyst

must be purchased in conjunction with product

$27.99

16 oz Black Catalyst

must be purchased in conjunction with product

$49.99

DBT Tin Based Silicone Accelerator

DBT is a one part additive used with condensation cure silicones to increase the cure speed. This is a by weight mix ratio. An accurate gram scale is recommended. IMPORTANT: Working time is drastically reduced in proportion to how much DBT you use. DBT added to total weight : Base / Cat 10.1 by weight plus DBT ) Physicals will be affected most of all library life.

Professional Grade Prop Making/Special FX/Model Making

Green Catalyst : 40 – 45 minute work time, 12 – 16 hours de mold
Blue Catalyst : 20 – 30 minute work time, 4 – 8 hours de mold

#2125 Base with MM Green Catalyst

Easy to pour 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries. Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life

Compare Silicone Specs

#2125 Base with MM Blue Catalyst

Easy to pour 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries .Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life.

Compare Silicone Specs

#2125 Base with MM Thixo II Brushable Blue Catalyst

brushable_instrutionssm2

A system designed for making brushable & lay up mold Easy to mix 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries .Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life.

Compare Silicone Specs

ProductPrice

2 lb Kit : MM Cat Thixo II Catalyst Brushable Blue Catalyst

must be purchased in conjunction with product

$34.99

10 lb Kit : MM Cat Thixo II Catalyst Brushable Blue Catalyst

must be purchased in conjunction with product

$110.99

44 lb Kit : MM Cat Thixo II Catalyst Brushable Blue Catalyst

must be purchased in conjunction with product

$429.99

#2125 Base with MM Thixo II Brushable Blue Catalyst & Green Catalyst for PRINT COAT

A system designed for making brushable & lay up mold Easy to mix 25 duro silicone. Excellent stretch, very good tear strength . Used in the molding process for the making of creatures and special FX. For the molding of figurines in the Art Cast Foundries .Ideal for molds when using GFRC and flexible polyurethane casting resin. Very good mold life and library life.

Compare Silicone Specs

Silicone Resin Starter Kit

This “Starter Kit” contains the high quality silicone and resin needed to produce small projects. Just the right amounts to familiarize yourself with our products.

ProductPrice

SILICONE 2125 / RESIN Starter Kit

Include: 1 Lb 2125 Kit including 2 oz Catalyst, and 2lb Kit of MPK70 Casting Resin

$35.99

SILICONE 2125 / RESIN Starter Kit with SUPPLIES

Include: 1 Lb 2125 Kit including 2 oz Catalyst, and 2lb Kit of MPK70 Casting Resin, and 10x 6" Mixing Sticks, 4 x 1 oz Measuring Cups, 10 x 10 oz Mixing Cups, 2 x 32 oz Mixing Cups

$43.99

Fake Ice

A two component, room temperature condensation cure silicone material. This material is a crystal clear 10.1 ratio material designed for HOLLYWOOD, THEATRE and SPECIAL FX market. Its clarity allows you to use as Fake Ice, Fake Glass and any application which requires clarity. Can be pigmented.

30 shore A, ~ 1,000 cps viscosity, 30 min. work time, de mold 4 – 8 hours

Fake Ice Specs
ProductPrice

44 lb Kit : Fake Ice

Condensation cured silicone material. Fake Ice, Fake Glass: any application which requires clarity.

$529.99

FG – Food Grade Mold Making RTV Silicone Rubber

Excellent for the molding and casting of chocolates, a wide variety of candies, dough, pastries, confectioneries and other gouret food reproductions.
Available shore A hardness 7, 22 and 28.
The FG – FOOD GRADE Catalyst and Silicone Base Systems main application is indirect food contact applications governed by CFR 177.2600. Any compositional deviation will result in the material being non compliant. This applies to OFF RATIO mixing and the use of additives.

Indirect Food Additive Regulations
CFR 21 parts 174-178 are “Indirect Food Additive Regulations”, of which CFR 177.2600 is part of. CFR 177.2600 covers “rubber articles intended for repeated use”. These are the guidelines that the FG catalyst conforms with. The specific use definition from CFR 21 177.2600 is as follows:
“Rubber articles intended for repeated use may be safely used in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food, subject to the provisions of this section”. This section being 21CFR 177.2600.
Further, these materials are not intended to have any technical effect in the food.
QM Cat FG has been tested with QM230, 107, 122, 128FG (10% catalyst) per the guidelines of CFR 177.2600 and the material has been found to be compliant.

FDA Compliant with CFR 177.2600

Soft 107 FG Cat Blue

Food Grade

This is a 5-9 duro. easy to pour mold making silicone. Typical work time 35-40minutes. De -Mold 12 -24 hours. READ COMPLIANT info.

Compare Silicone Specs

Medium 122 FG Cat Blue

Food Grade

This is a 21-25 duro. easy to pour mold making silicone. Typical work time 35-40minutes. De Mold 12-24 hours. READ COMPLIANT info.

Compare Silicone Specs

Firm 128 FG Cat Blue

Food Grade

This is a 26-30 duro. easy to pour mold making silicone. Typical work time 35-40minutes. De Mold 12-24 hours. READ COMPLIANT info.

Compare Silicone Specs

Soft 107 FG Cat Clear

(Base is beige, Catalyst is clear, when cured color is light beige)

Food Grade

This is a 5-9 duro. easy to pour mold making silicone. Typical work time 35-40minutes. De -Mold 12 -24 hours. READ COMPLIANT info.

Compare Silicone Specs

Medium 122 FG Cat Clear

(Base is beige, Catalyst is clear, when cured color is light beige)

Food Grade

This is a 21-25 duro. easy to pour mold making silicone. Typical work time 35-40minutes. De Mold 12-24 hours. READ COMPLIANT info.

Compare Silicone Specs

Firm 128 FG Cat Clear

(Base is beige, Catalyst is clear, when cured color is light beige)

Food Grade

This is a 26-30 duro. easy to pour mold making silicone. Typical work time 35-40minutes. De Mold 12-24 hours. READ COMPLIANT info.

Compare Silicone Specs

QM230FG Blue Cat

Blue Catalyst

QM 230 FG is a 30 Shore A Platinum Silicone. With a 45-60 min work time and a 6-8 hour De Mold time. Temp range up to 204C. It is also certified and can be used for the making of FOOD GRADE Silicone Molds

Compare Silicone Specs

QM450FG Blue Cat

Blue Catalyst

QM 245 FG is a 45 Shore A Platinum Silicone. With a work time of up to 90 mins and a 6-8 hour De Mold time. Temp range up to 204C. It is also certified and can be used for the making of FOOD GRADE Silicone Molds

Compare Silicone Specs

QM260FG Blue Cat

Blue Catalyst

QM 260 FG is a 60 shore A Platinum Silicone with a 45-60 min work time and an 8-12 hour de mold time. It is also certified and can be used for the making of FOOD GRADE Silicone Molds

Compare Silicone Specs

No product found.

PT Accelerator for Platinum Cure Silicones

PTPlatinum Accelerator is low a viscosity additive that decreases demold time and improves inhibition resistance with addition (platinum) cure silicones.Mix well into B-side first, then mix components A & B

PT Accelerator

ProductPrice

2 oz – PT Accelerator for Platinum Cure Silicones

PT Platinum Accelerator is low a viscosity additive that decreases demold time and improves inhibition resistance with addition (platinum) cure silicones. Mix well into B-side first, then mix components A & B together.

$25.99

4 oz – PT Accelerator for Platinum Cure Silicones

PT Platinum Accelerator is low a viscosity additive that decreases demold time and improves inhibition resistance with addition (platinum) cure silicones. Mix well into B-side first, then mix components A & B together.

$45.99

16 oz – PT Accelerator for Platinum Cure Silicones

PT Platinum Accelerator is low a viscosity additive that decreases demold time and improves inhibition resistance with addition (platinum) cure silicones. Mix well into B-side first, then mix components A & B together.

$65.99

Platinum Silicones

Addition Cured Platinum Silicones

Platinum Silicone QM 230 Blue Catalyst

QM 230 is a 30 Shore A Platinum Silicone. With a 45-60 min work time and a 6-8 hour De Mold time. Temp range up to 204C. It is also certified and can be used for the making of FOOD GRADE Silicone Molds

Compare Platinum Silicone Specs

Platinum Silicone QM 245

QM 245 is a 45 Shore A Platinum Silicone. With a work time of up to 90 mins and a 6-8 hour De Mold time. Temperature range up to 204C. Complies with FDA indirect food contact regulation CFR 177.2600. Excellent for the making of silicone molds chocolate & candies.

Compare Platinum Silicone Specs

Platinum Silicone QM 260

QM 260 is a 60 shore A platinum silicone with a 45 – 60 min work time and a 8 – 12 hour de mold time

Compare Platinum Silicone Specs

Platinum Silicone QM 262

QM 262 is a 62 Shore A platinum Silicone. It has a 30 – 60 min work life and an 8 – 12 hour de mold

Compare Platinum Silicone Specs

Platinum Silicone QM 270

QM 270 is a 70 shore A Platinum silicone with a 30 min work time and a 8 – 12 hour de Mold time

Compare Platinum Silicone Specs

Platinum Silicone QM 280

QM 280 is 80 shore a platinum silicone with a 60 minute work time and a 8 – 12 hour de mold time

Compare Platinum Silicone Specs

Platinum Silicone QM 264 HighTemp

QM 264HT is a 60 Shore A Platinum Silicone is a High Temperature material Ideal for casting Low Melt Metals. Useful Temperature range is 250C. Dark grey in color when cured. Pot life approx 120mins and demold time is 18 hours.

Compare Platinum Silicone Specs

MPK 1125 Duplicating Silicone

Ideal for applications where reproducing the finest of details and exceptional accuracy is required



MPK 1125 is a 25 Shore A Platinum Duplicating Silicone. The Mix Ratio is 1:1 by weight. 2 – 5 minutes work time with a De-Mold time of 20 -30 minutes.

Compare Silicone Specs


True Skin

Translucent skin material for prosthetics, animatronics, skin replication, and special effects. Can be pigmented.Excellent flexibility.

True Skin 30A

Compare True Skin Specs

ProductPrice

8 lb Kit : True Skin 30A

Translucent silicone for mold-making. Low viscosity, 1:1 mix ratio, 20 minute work-life, 6 to 8 hour demold time.

$109.99

16 lb Kit : True Skin 30A

Translucent silicone for mold-making. Low viscosity, 1:1 mix ratio, 20 minute work-life, 6 to 8 hour demold time.

$209.99

80 lb Kit : True Skin 30A

Translucent silicone for mold-making. Low viscosity, 1:1 mix ratio, 20 minute work-life, 6 to 8 hour demold time.

$859.99

True Skin 20A

Compare True Skin Specs

ProductPrice

8 lb Kit : True Skin 20A

Translucent silicone for mold-making. Low viscosity, 1:1 mix ratio, 20 minute work-life, 6 to 8 hour demold time.

$109.99

16 lb Kit : True Skin 20A

Translucent silicone for mold-making. Low viscosity, 1:1 mix ratio, 20 minute work-life, 6 to 8 hour demold time.

$209.99

80 lb Kit : True Skin 20A

Translucent silicone for mold-making. Low viscosity, 1:1 mix ratio, 20 minute work-life, 6 to 8 hour demold time.

$859.99

True Skin 10A

Compare True Skin Specs

ProductPrice

8 lb Kit : True Skin 10A

$109.99

16 lb Kit : True Skin 10A

Translucent skin material for prosthetics, animatronics, skin replication, and special effects.Can be pigmented.Excellent flexibility. Low viscosity, 1:1 mix ratio, 20 minute work-life, 6 to 8 hour demold time

$209.99

80 lb Kit : True Skin 10A

Translucent skin material for prosthetics, animatronics, skin replication, and special effects.Can be pigmented.Excellent flexibility. Low viscosity, 1:1 mix ratio, 20 minute work-life, 6 to 8 hour demold time

$859.99
see also MPK Deadener for use with True Skin 10A

Silicone Fluid

SILICONE FLUID : Our fluid is 100cps. It is used primarily for the softening / plasticizing of silicones. When you add the fluid DON’T FORGET TO ADJUST YOUR MIX RATIO if you don’t you may incur leeching / silicone fluid bleeding issues. This additive lowers the durometer of our silicones.

ProductPrice

1 lb/16 oz Kit Silicone Fluid

Our fluid is 100cps. It is used primarily for the softening / plasticizing of  silicone. When you add the fluid DON’T FORGET TO ADJUST YOUR MIX RATIO if you don’t you may incur leeching / silicone fluid bleeding issues. This additive lowers the durometer of our silicones.

$8.99

4 lb/64 oz lb Kit Silicone Fluid

Our fluid is 100cps. It is used primarily for the softening / plasticizing of silicone. When you add the fluid DON’T FORGET TO ADJUST YOUR MIX RATIO if you don’t you may incur leeching / silicone fluid bleeding issues. This additive lowers the durometer of our silicones.

$29.99

8 lb/ 128 oz lb Kit Silicone Fluid

Our fluid is 100cps. It is used primarily for the softening / plasticizing of silicone. When you add the fluid DON’T FORGET TO ADJUST YOUR MIX RATIO if you don’t you may incur leeching / silicone fluid bleeding issues. This additive lowers the durometer of our silicones.

$59.99

MPK Deadener for use with True Skin 10A

The purpose of adding DEADENER to silicone is to achieve a more FLESH LIKE feel and to have human like REBOUND capabilities. SAVINGS – By using 50% less of our DEADENER you will be able to achieve the same results as most other popular products in the market place.

MPK Deadener

ProductPrice

20 lb – MPK Deadener – For use with True Skin 10A.

A low viscosity, clear additive to soften the material. It will slow the work-time and the cure time proportional to how much Deadener is added. At 40% Deadener added, the cured silicone will remain tacky. Brushing talcum powder onto the cured piece will eliminate tack. Mix Deadener well into B-side first, then mix components A & B together.

TOP